SUNLU PLA Meta 3D Printer Filament & Smooth Squeeze: Say goodbye to clogging.PLA Meta is 1.5 times more fluid than regular PLA. Minimum tolerance and low warping to ensure consistent feeding and fast prints.
①【High speed printing & No clogging】Smooth Squeeze.SUNLU 1.75mm PLA Meta 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging.The perfect dimensional accuracy +/-0.02mm provide optimum flow through the extruder nozzle.PLA Meta is 1.5 times more fluid than regular PLA.
②【Avoid knotting & No odour】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure neat lines with few kinks, avoiding possible breaks.PLA Meta is a biological material, purified from corn grain, eco-friendly, odourless and harmless to humans.
③【Impact Resistance & Energy efficiency】High toughness and non-brittle PLA Meta printed parts can be sanded, drilled and painted.The PLA Meta filament is very tough and not easily brittle, the model does not break easily when dropped from a height to the ground.PLA Meta printing temperature: 180-200℃,low printing temperature printing for greater energy efficiency.
④【Glossy Surface & Good adhesion】Brightly coloured PLA Meta filaments bring glossy surface prints to arts, crafts and 3D projects.PLA Meta has the advantages of high purity with good adhesion and superb layer bonding.
⑤【Vacuum packed & No Bubbles】SUNLU PLA Meta 3D printer filaments are all vacuumed sealed along with a desiccant pack.Vacuum packaging to avoid dust and protect filament.No Bubbles,lower shrinkage, lower warping.
Why can't the filaments stick to the hotbed easy?
1). Check the temperature setting before printing, PLA Meta filament temperature about 180-200℃;
2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;
3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;
1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.
2).Be sure to insert the free end of the PLA filament into the holes to avoid being tangled for next time use.
3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.