We will send you an email to reset your password.
1. Clean the surface with a clean damp cloth.
2. connect the power source and use the glue stick to and preheat for 5-10 minutes.
3. According to the dent size to choose the Glue Puller Tab, then put the heated glue on puller tab, immediately place puller tab in the center of the dent and hold on until it sticks.
4. Let the glue cool for about 8-10 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter.
5. After the glue cooling, use a Slide hammer dent repair tools or bridge dent puller to align to pull up the dent. Repeat the above steps until the dent disappear.
6. After finishing the dent, use the 95% alcohol to clean the residual glue which on the car surface with plastic shovel.（Due to the low temperature in winter, it is recommended to use a hair dryer or hot water to soften the glue, and the softened glue is easy to remove.）
